If it is an unmanaged Fast Ethernet switch you are looking for, you can’t do better than our XSNet 4000SW series. Clever engineering means these compact switches have no internal fans or other moving parts. The XSNet 4040SW has four 10/100Base-TX ports and one 100Base-FX port for two single-mode fibers.
Features
Unmanaged 4 + 1-port Fast Ethernet switch
Industrial temperature range
4x 10/100Base-TX ports (IEEE 802.3u)
1x 100Base-FX two-fiber port
N-way autonegotiation
Auto-MDI/MDI-X crossover
Non-blocking store-and-forward switching
Wide supply voltage range
Performance
Address table size
2048 MAC addresses
Switching method
Store-and-forward
Electrical
Interface(s)
4 x 10/100Base-TX
Auto MDI, MDIX autonegotiation
Connector type
4x RJ-45
Maximum distance
100m
Standards
IEEE 802.3
10Base-T specification
IEEE 802.3u
100Base-TX | 100Base-FX
IEEE 802.3x
Full-duplex operation
Powering
Power consumption
4.3W at 72VAC
Input voltage range
12-48VDC
Environmental
Operating temperature
-10°C to +60°C (+14°F to +140°F) Tested at -20°C to +70°C (-4°F to +158°F)
Storage temperature
-25°C to +85°C (-13°F to +185°F)
Relative humidity
<95% with no condensation
Safety and EMC
UL 60950, IEC/EN 61000, EN 50130-4, EN 50081-1, EN 55022, FCC part 15, IEC/EN 61000 (6-4, -32-2, 3-3)
Mechanical
Dimensions
(h x w x d) 100 x 26 x 70mm (4.33 x 3.02 x 2.76in)
Weight
490g (17.28oz)
Housing
DIN rail mounting
Optical
XSNet 4040 SW
Fiber type
2xSM
Output wavelength
1310nm
Link length
40km
Ethernet
100Mb
Connector type
Dual SC
Ordering information
XSNet™ 4040SW
4 + 1-port Fast Ethernet switch | Fiber type: 2xSM
