Video | |
|---|
| Video format | |
| Video input | |
| Connector type | |
| Bandwidth | |
| Differential gain | |
| Differential phase | |
| Signal-to-noise ratio | |
| Video encoding | | Uncompressed 9-bit linear PCM |
|
| Video sampling rate | |
Data | |
|---|
| Port | |
| Interface | | Selectable duplex RS-232, RS-422 2- or 4-wire, RS-485 2- or 4-wire, Manchester, Bi-phase |
|
| Rate | | RS-232, RS-422, and RS-458 up to 128kb/s (auto baud), Manchester Bi-phase 32kb/s |
|
| Connector type | | 5-pin removable screw terminal except the 9229DT-P that mounts directly to the camera PC board |
|
Management | |
|---|
| LED status indicators | |
| 9221DT, 9225DT | | Video in, sync, not sync, loop, RD |
|
| 9221DR, 9225DR | | Tx video in, loop, sync, not sync, |
|
| RD 9229DT-P | |
| Management system | | 9900 Network Management System (NMS) |
|
Power requirements | |
|---|
| 9221DT | |
| Voltage | |
| Current | |
| 9221DR | |
| Voltage | |
| Current | |
| 9225DT | |
| Voltage | |
| Current | |
| 9225DR | |
| Voltage | |
| Current | |
| 9229DT | |
| Voltage | |
| Current | |
Environmental | |
|---|
| Operating temperature | | -40°C to +74°C (-40°F to +165°F) |
|
| Storage temperature | | -55°C to +85°C (-67°F to +185°F) |
|
| Relative humidity | | <95% with no condensation |
|
Mechanical | |
|---|
| 9221D | |
| Housing | | 1-slot card, 9000 series chassis |
|
| Dimensions | | (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in) |
|
| Weight | |
| 9225D | |
| Housing | |
| Dimensions | | (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.2 x 5.0in) |
|
| Weight | |
| 9229DT-P | |
| Housing | | Pelco Spectra III internal mount |
|
| Dimensions | | (h x w x d) 78.7 x 19 x 121.9mm (3.1 x 0.75 x 4.8in) |
|
| Weight | |
Optical | |
|---|
| 9221DT/DR-MMH TX/RX | |
| Fiber type | |
| Output wavelength | |
| Output power | |
| Input sensitivity | |
| System link budget | |
| Fiber length (range)** | |
| Connector type | |
| 9221DT/DR-SM TX/RX | |
| Fiber type | |
| Output wavelength | |
| Output power | |
| Input sensitivity | |
| System link budget | |
| Fiber length (range)** | |
| Connector type | |
| 9229DT/9221DR-SM TX/RX | |
| Fiber type | |
| Output wavelength | |
| Output power | |
| Input sensitivity | |
| System link budget | |
| Fiber length (range)** | |
| Connector type | |
| 9229DT/9221DR-MMH TX/RX | |
| Fiber type | |
| Output wavelength | |
| Output power | |
| Input sensitivity | |
| System link budget | |
| Fiber length (range)** | |
| Connector type | |
| | *For 50/125μm fiber, subtract 4dB. |
|
| | ** Range may be limited by fiber bandwidth. |
|
Ordering information | |
|---|
| 9221DT/MMH-ST | | 1-channel digital video transmitter, duplex data | Fiber type : 1xMM |
|
| 9225DT/SM-ST | | 1-channel digital video transmitter, duplex data | Fiber type : 1xSM |
|
| 9221DR/MMH-ST | | 1-channel digital video receiver, duplex data | Fiber type : 1xMM |
|
| 9225DR/SM-ST | | 1-channel digital video receiver, duplex data | Fiber type : 1xSM |
|
| 9229DT-P/MMH-ST | | In-dome transmitter for Pelco Spectra III | Fiber type : 1xMM |
|
| 9221DT/SM-ST | | 1-channel digital video transmitter, duplex data | Fiber type : 1xSM |
|
| 9221DR/SM-ST | | 1-channel digital video receiver, duplex data | Fiber type : 1xSM |
|
| 9229DT-P/SM-ST | | In-dome transmitter for Pelco Spectra III | Fiber type : 1xSM |
|
| 9225DT/MMH-ST | | Standalone version of the 9221 models |
|
| 9225DR/MMH-ST | | Standalone version of the 9221 models |
|
| PSA-UN12DC | | Wall-Wart, switching power supply |
|
| PSR-12DC | | DIN rail mounting, switching power supply |
|
