Siqura

INT-RJ / INT-SM / INT-MM

Network Interface and cable tail of the Siqura SA or EX cameras

Product Sheet

INT-RJ / INT-SM / INT-MM

The INT-RJ, INT-SM or INT-MM defines the interface/cable tail on the Siqura SA or EX camera. This option should always be defined together with the housing and the assembled camera. For INMETRO add '-IN' to the product name.
(These interfaces are not suited for the new EX3 and SA3 camera models, they need the "INT3-RJ / INT3-SM / INT3-MM")

Features

  • INT-RJ(-IN): CAT 5e interface on RJ45
  • INT-SM(-IN): Single-mode fiber interface
  • INT-MM(-IN): Multi-mode fiber interface
  • ATEX certified armoured multicable
  • ATEX certified Ex d barrier glands
  • INMETRO certified (-IN versions only)

Description

SA-Housing
The SA housings can be fitted with direct fiber outputs by using the INT-SM for Ethernet over single-mode. For fast Ethernet connections (RJ45) the INT-RJ interface is needed. Special SA cable tails for Fast Ethernet or SM fiber at 5 or 10 meters are also available.

Ex-Housing
The Atex or EX-housings require a complete installed cable tail. The INT-RJ5 or INT-RJ10 define a EX cable tail for 100 Mb Fast Ethernet of 5 or 10 meter. INT-SM5 or INT-SM10 defines a single-mode connection with a 5 or 10 meter cable tail, and INT-MM similar for multi-mode. The cable tail is terminated by two Ex d barrier glands on both sides. At the open part of the cable the fiber is fitted with SC fiber connectors.

INMETRO
For INMETRO certified installations the cable tail has to be provided with INMETRO certified cable glands. Add “-IN” to the required cable.

(c) 20240802