Video (x4) | |
|---|
| Video format | |
| Video input | |
| Connector | |
| Bandwidth | |
| Differential gain | | 1.0% typical, 2.0% maximum |
|
| Differential phase | | 0.7° typical, 2.0° maximum |
|
| SNR | | ≥63 dB over usable fiber range (weighted per RS-250C standard) |
|
| Video encoding | | Uncompressed 9-bit linear PCM |
|
| Video sampling rate | |
Data channels | |
|---|
| Channel 1 | | Duplex RS-232 115.2 Kbps Auto Baud, RJ-45 connector shared with data |
|
| Channel 2 | | Channel 2 User-configurable duplex RS-232, RS-422 or RS-485 2-/4-wire or Manchester (BiPhase), 128 Kbps Auto Baud (Manchester 32 Kbps), RJ-45 connector shared with data Channel 1 |
|
High-speed port (x1) | |
|---|
| High-speed port | | Supports duplex RS-422 data or optional Option Module host cards (9961A/ 9962A) supporting 4 or 8 duplex Option Modules or 10 Mbps Ethernet signals (9973) |
|
| RS-422 data port specifications | | 2-wire RS-422 @ 1.5 Mbps Asynchronous, or 15 Mbps Synchronous with R-J45 type connector |
|
Powering | |
|---|
| Voltage | | 6 Vdc (supplied by chassis) |
|
| Current | |
| 9482DT | |
| 9482DR | |
Management | |
|---|
| LED status indicators | |
| 9482DT | | Status, Video Present (x4), Up-the-Coax Data Active (x4) |
|
| 9482DR | | Status, Tx Video Present (x4), Up-the-Coax Data Active (x4) |
|
| NMS support | | The 9482D is supported by the 9900 Network Management System (NMS) software. |
|
Environmental | |
|---|
| Operating temperature | | -40 °C to +74 °C (-40 °F to +165 °F) |
|
| Storage temperature | | -55 °C to +85 °C (-67 °F to +185 °F) |
|
| Relative humidity | |
Note: The selection of the power supply may affect the system operating temperature range. | |
|---|
Mechanical | |
|---|
| 9482DT, 9482DR | | 2-slot card, Series 9000 chassis |
|
| Dimensions (h x w x d) | | 154.9 x 40.6 x 218.4 mm (6.1 x 1.6 x 8.6 in) |
|
| Weight | | (approx.) 362.9 g (0.8 lbs) |
|
Optical | |
|---|
| MMH | |
Optical pair types TX/RX | |
|---|
| Fiber type | |
| Wavelength TX/RX | |
| Output power TX/RX | |
| Sensitivity RX/TX | |
| Link budget TX to RX/RX to TX | |
| Range *'**'*** | |
| Connector | |
| SM | |
Optical pair types TX/RX | |
|---|
| Fiber type | |
| Wavelength TX/RX | |
| Output power TX/RX | |
| Sensitivity RX/TX | |
| Link budget TX to RX/RX to TX | |
| Range *'**'*** | |
| Connector | |
| | *Range estimates are limited due to the nature of “Up-the-Coax” control signal systems. |
|
| | ** Fiber losses are based on optical losses of 1.0 dB/km @ 1310 nm on 50 and 62.5/125 fiber, 0.35 dB/km @ 1310 nm and 0.25 dB/km @ 1550 nm on 09/125 fiber, and include a |
|
| | *** dB safety factor. 3 Range may be limited by modal and chromatic dispersion, fiber quality, and fiber bandwidth. Range estimates for multimode are based on 500 MHz/km quality fiber. |
|
| | **** ST connectors standard; consult factory for availability of FC or other connector types. |
|
Ordering information | |
|---|
| 9482DT/MMH–ST | | FourVideoPlus, transmitter, rack-mount*** | Fiber type : 1x MM**** |
|
| 9482DR/MMH–ST | | FourVideoPlus, receiver*, rack-mount*** | Fiber type : 1x MM**** |
|
| 9482DT/SM–ST | | FourVideoPlus, transmitter, rack-mount*** | Fiber type : 1x SM**** |
|
| 9482DR/SM–ST | | FourVideoPlus, receiver**, rack-mount*** | Fiber type : 1x SM**** |
|
| | * Mates with MMH transmitter type. |
|
| | ** Mates with SM transmitter type. |
|
| | *** Use the 9003-2, -3, or -6 to convert this unit to a stand-alone module. |
|
| | **** Refer to the Optical section for detailed optical data. |
|
